Epoxy resin flooring systems — inland-China resin factory-direct to Irish flooring contractors
Industrial epoxy resin flooring systems — two-part self-levelling resins, anti-slip aggregate systems, electrostatically-conductive (ESD) flooring, and food-grade resin systems — are the standard solution for industrial, warehouse, pharmaceutical, and food-processing floor finishes. The two-part resin component supply is dominantly produced in inland-China specialty chemicals clusters with established export-quality formulation capability. Ériu Sourcing sources epoxy resin flooring systems direct for Irish industrial flooring contractors, warehouse fit-out specialists, food-grade and pharma installation contractors, and commercial flooring trade buyers.
Last reviewed:
- Inland-China specialty chemicals clusters — Henan, Jiangsu, Shandong Manufacturing region
- 3–5 weeks production Production lead time
- EN + CE Compliance verified at factory
Inland-China specialty chemicals clusters — Henan, Jiangsu, Shandong
The inland-China epoxy resin manufacturing base supplies both the bisphenol-A epoxy resin component (Part A) and the amine or polyamide hardener component (Part B) at industrial scale to European specialist flooring contractors. Premium-spec cluster factories produce solvent-free 100% solids formulations with VOC content meeting EU industrial-hygiene standards, food-grade certifications where required, and anti-slip aggregate systems with verified slip-rating performance.
See our full China network →
Built for Irish trade buyers, not consumers
- ✓ Irish industrial flooring contractors and specialist installers
- ✓ Warehouse fit-out specialists (3PL, distribution centre operators)
- ✓ Food-processing and food-grade kitchen installation contractors
- ✓ Pharmaceutical and clean-room flooring specialists
- ✓ Garage, workshop, and showroom flooring installers
- ✓ Hospital and healthcare facilities flooring trade
Technical specification
| Self-levelling resin | Two-part 100% solids; pot life 30–45 min; cure 12–24 hr; build 2–5 mm in single coat |
|---|---|
| Anti-slip aggregate | Aluminium oxide, silicon carbide, or quartz sand broadcast; classes R10 / R11 / R12 / R13 per DIN 51130 |
| ESD flooring | Electrostatically-conductive system; surface resistance 1×10⁵ to 1×10⁹ ohms for static-sensitive areas |
| Food-grade systems | EU 10/2011 food-contact compliant formulations; HACCP-compatible |
| Colour options | Standard RAL range; safety-marking lines (yellow / red) for warehouse traffic management |
| MOQ | Single 20HQ container (~12 tonnes of resin component); mixed-system orders accepted |
What we verify at the factory — before the container is sealed
- EN 13813 — Screed material and floor screeds — Properties and requirements
- CE marking + EU Declaration of Performance per CPR (EU) 305/2011
- EU 10/2011 — Food-contact material compliance (where applicable)
- DIN 51130 — Slip resistance classification for workplace flooring
- REACH chemical compliance on resin and hardener formulations
- ISO 9001 quality-system certification at cluster factories
Goods that fail compliance or pre-shipment QC stay in China at the factory's cost — you do not pay freight on non-compliant product.
Ask about compliance documentation →What this lands at in Ireland
A typical two-part 100% solids self-levelling epoxy resin system (Component A + Component B) ships factory-direct from the inland-China cluster at €2.40 to €3.20 per kg FOB factory, landing in Ireland at approximately €3.30 to €4.20 per kg after freight, duty, VAT and customs. Irish flooring-contractor trade pricing for equivalent specification typically runs €8 to €11 per kg — a landed-cost saving of 55–65%. For a typical 1,000 m² warehouse installation requiring ~4,000 kg of resin component, the landed-cost saving over an Irish trade-supplier order is approximately €18,000 to €27,000.
Lead time and logistics
Lead time: 3–5 weeks production + 4–5 weeks sea freight (Shanghai → Dublin).
Epoxy resin components ship as paired pail or drum sets — typical 20-litre pail (~25 kg) packaging or 200-litre drum (~250 kg) packaging on heat-treated wooden pallets. A 20HQ container holds approximately 12 tonnes of resin component plus matching hardener — enough for approximately 3,000–4,000 m² of standard 2-3 mm self-levelling installation. Ériu coordinates Dublin Port reception, customs clearance with appropriate chemical-import documentation, and inland delivery to flooring contractor or directly to project site.
Construction Materials — sourcing questions answered
How does inland-China cluster-direct epoxy resin compare to Sika, Mapei, or Resdev in the UK?
The premium-spec end of the inland-China cluster produces two-part 100% solids epoxy resin systems comparable to Sika, Mapei, or Resdev in tensile strength, abrasion resistance, chemical resistance, and substrate adhesion. The cluster also produces lower-spec solvent-borne and lower-solids formulations — Ériu exclusively sources from the 100% solids premium-spec end and verifies VOC content and solids content at the factory.
What is the typical saving for an Irish flooring contractor on a 1,000 m² warehouse installation?
Typical landed-cost saving is 55–65% on resin component versus Irish flooring-trade pricing for equivalent specification. For a 1,000 m² installation requiring ~4,000 kg of resin component, the landed-cost saving runs approximately €18,000 to €27,000. The saving compounds for larger fleet contractors building inventory across multiple concurrent installations.
Are inland-China cluster epoxy systems food-grade and pharma compliant for Irish use?
Yes — premium-spec cluster factories supply food-grade epoxy formulations meeting EU 10/2011 food-contact compliance and HACCP-compatible installation specifications for food-processing and food-grade kitchen flooring. ESD (electrostatically-conductive) systems for pharmaceutical clean-room flooring are also supplied to spec — surface resistance verified at the factory.
What anti-slip and slip-rating options are available?
Cluster factories supply anti-slip aggregate systems classified to DIN 51130 R10, R11, R12, and R13 slip ratings using aluminium oxide, silicon carbide, or quartz sand broadcast. R10 is standard warehouse interior, R11 is standard wet-area kitchen, R12 is industrial process areas with frequent wet conditions, R13 is exterior or extreme wet-area specification. Ériu specifies the appropriate anti-slip class on the order.
How is chemical-import documentation handled for resin systems at Dublin Port?
Two-part epoxy resin systems require appropriate chemical-import documentation at Dublin Port — the SDS (Safety Data Sheet) for each component, the resin formulation compliance statement, and any food-grade or specialty compliance certifications. Ériu coordinates with the Irish customs broker to ensure the documentation pack is complete before vessel arrival; clearance is typically straightforward for premium-spec EU-standard formulations.
More from this category
← Back to Construction MaterialsGet factory-direct pricing for epoxy resin flooring systems — inland-china resin factory-direct to irish flooring contractors
Send a brief — specification, quantity, timeline. We come back with factory-level pricing, a supplier shortlist, and a clear plan. No obligation.